LayLax PROMETHEUS Stainless Steel Tokyo Marui Evolt M4A1 Carbine EG Barrel (175mm)

-SUS304 Stainless Steel
-Dimensional accuracy of 1/100mm
-Inner diameter φ6.03mm to prevent BBs from wobbling
-It boasts the highest precision with an inner diameter of φ6.03mm and a dimensional tolerance of 1/100mm. To maintain this precision, SUS (stainless steel), which is excellent in durability and strength, is used. The EG barrel, which even eliminates unnecessary coatings, fulfills all the necessary elements to hit the target with BB bullets and is the first step in airsoft gun customization.
-Barrel total length: 175mm
-Inner diameter: φ6.03mm
-Compatible models: Tokyo Marui Electric Gun Evolt
・M4A1 Carbine

*Due to the tight inner diameter, if used BBs or low-precision BBs are used, there is a risk of BB jams or reduced accuracy, so please be careful.

*To maintain performance, please clean the barrel regularly.

*This product is a model with a shorter overall length than the genuine product. Muzzle velocity will decrease after installation.

*For matching the outer barrel length, a combination of our "Tokyo Marui Evolt M4A1 Outer Barrel Base Short" and "Tokyo Marui M4 Outer Barrel Piece 5.0 inch" is optimal.

*After customization, always check the joule value and muzzle velocity. If the regulated value of 0.989 joules is exceeded due to amendments to the Swords and Firearms Control Law, you will be subject to penalties. Also, measured values will always vary due to factors such as season, time of day, HOP adjustment, and gun characteristics. Please use your airsoft gun with a joule value that allows for a certain margin.

Item code:
4570189749879

(The following content is prohibited for any unauthorized use; Rainbow 8 Hong Kong reserves the right for any legal action.)
* Toys only, please be safe use of air guns and must be follow the local law requirement for all airsoft use. *

* Please note: installing parts / assemble /fitting airsoft gun will need intermediate knowledge; for expert or airsoft gunsmith. Please refer to your airsoft gunsmith for proper installation / fitting. Fitting may be needed as the condition of each airsoft gun might be different. Regular maintenance is needed for all airsoft guns in order to keep it in good working condition and reduce wear out issue on parts. The actual performance is based on the overall setting on your airsoft gun. Please consult your airsoft gunsmith for advising. Strong Screw glue is needed for installation. Use a drop of screw glue when installing the screw and wait for it to dry out overnight. Damage could be caused to the screw thread if screw glue was not used. *