Burris AR-P.E.P.R.™ Scope Mount (30mm / 1")

-The Burris P.E.P.R. mount has become the absolute go-to mount of choice for an incredibly solid, long-lasting cantilever mount.
-Providing the necessary clearance and adding as much as 2 inches of forward scope positioning. It also ensures proper eye placement -- in fact, P.E.P.R. stands for "Proper Eye Position Ready" (although it's easier to just say PEPPER MOUNT).
-The PEPR Mount is a perfect AR or flattop mounting solution.
-Allows up to 2 inches of forward scope positioning
-Provides optimum eye relief and full field of view
-Includes both smooth and Picatinny ring tops
-Available in 1 inch, 30 mm
-Quick-detach models are available in 1 inch and 30 mm sizes

Specifications:
Item code: 410341
Size: 30mm
Weight: 8.7 oz.
A: 1.00
B: 1.75
C: 1.6
D: 4.15
E: 2.15
Quick Detach: N/A
Ring Top Torque: 20 inch-lbs
Cross-Bolt Torque: 65 inch-lbs

Item code: 410343
Size: 1 in
Weight: 8.7 oz.
A: 1.00
B: 1.57
C: 1.5
D: 4.15
E: 2.15
Quick Detach: N/A
Ring Top Torque: 20 inch-lbs
Cross-Bolt Torque: 65 inch-lbs

(The following content is prohibited for any unauthorized use; Rainbow 8 Hong Kong reserves the right for any legal action.)
* Toys only, please be safe use of air guns and must be follow the local law requirement for all airsoft use. *

* Please note: installing parts / assemble /fitting airsoft gun will need intermediate knowledge; for expert or airsoft gunsmith. Please refer to your airsoft gunsmith for proper installation / fitting. Fitting may be needed as the condition of each airsoft gun might be different. Regular maintenance is needed for all airsoft guns in order to keep it in good working condition and reduce wear out issue on parts. The actual performance is based on the overall setting on your airsoft gun. Please consult your airsoft gunsmith for advising. Strong Screw glue is needed for installation. Use a drop of screw glue when installing the screw and wait for it to dry out overnight. Damage could be caused to the screw thread if screw glue was not used. *